ACS-101 - WIRELESS ONE CHANNEL ALARM SYSTEM SET

Purpose

​

Wireless one-channel multi purpose alarm system set designed for use as a PANIC BUTTON in security systems and for remote control of any electronic equipment:

​

• Electrical gates

• Sliding doors

• Electromagnetic locks

• Automatic barriers

• Electrical curtains

• Lighting fixtures

• Arming/disarming of alarm systems, etc.

Features

​

• Four operating modes of the receiver:

      1. Panic button mode (Security)
      2. Switching mode (ON/OFF)
      3. Hold mode (Continuous)
      4. Pulse mode - 1 second

• Receiving range in open space - up to 250 meters

• Maximum quantity of remote controls learning the receiver – 680

• Easy learning of the receiver by additional remote controls

• Unauthorized access protection (in “Panic Button” mode)

• Last event memory: 30 min (in “Panic Button” mode)

• Alarm is triggered when the electric power supply is disconnected 
  (in “Panic Button” mode) 

Receiving Range

​

The operating range of the hand-held remote controls depends on the mounting location of the receiver. 
Various obstructions, environmental factors, radio-frequency and electromagnetic sources might influence the emission of radio-signal and as a result, might shorten the receiving range. For optimal radio-signal reception: mount the receiver at least 1.5 meter above the ground, as far as possible from any radio frequency and electromagnetic sources.